Teflon Lined Water Ring Vacuum Pump

Details

Specification

1. Introduction:

IIFSK/2FSK corrosion resistant teflon lined water ring vacuum pump is a new patented product independently developed by us. The product combines corrosion resist materials with high degree of vacuum and has such features as good corrosion resistance, high degree of ultimate vacuum and large air displacement. Its performances are leading both at home and abroad.

The pump is widely applied to evaporation, filtering, drying, concentration, distillation and crystallization in vacuum state in food, petrochemical, chemical, pharmaceutical, metallurgy, electronics etc. It is suitable for pumping various gases and caustic gas without solid particles.

2. Product details:

Working Principle:	Water ring vacuum pump
Main applications:	Air & Gas
Driver:	Electric motor
Power Specs:	380/415V/3phase/50hz
Max.permissible fluid temperature:	50°C(122°F)
Type of connection:	Flange
Installation position:	Horizontal
Casing/Inner parts material:	Cast iron Lined Teflon, FRPP impeller
Shaft seal type:	Mechanical seal
Free passage:	0mm
Ultimate vacuum:	-0.098MPa(735mmHg)
Maximum drive rating:	37KW(50HP)
Maximum Inlet/outlet diameter:	150mm(6inch)
Flow rate range:	81-7200m3/h(356.4-31680US.GPM)

3. Performance data:

Model	Max. Pumping Volume (m3/min)	Ultimate Vacuum		Power (kw)	RPM (r/min)	Water Consumption (L/min)	Inlet/Outlet (mm)
Model	Max. Pumping Volume (m3/min)	Mpa	mmHg	Power (kw)	RPM (r/min)	Water Consumption (L/min)	Inlet/Outlet (mm)
II FSK-1.5	1.6	0.098	735	3	1440	8	65/65
II FSK-2	2.76	0.098	735	4	1440	9	65/65
II FSK-3	3.85	0.098	735	5.5	1440	12	65/65
II FSK-4	4.68	0.098	735	7.5	1440	15	65/65
II FSK-6	6.1	0.098	735	11	1440	20	80/80
II FSK-8	7.8	0.098	735	15	1440	24.5	80/80
II FSK-12	12.6	0.098	735	22	970	26	125/125
II FSK-16	16.8	0.098	735	30	970	34	150/150
II FSK-20	20.4	0.098	735	37	970	36	150/150